Cleaning and maintenance
66
Setting timed vapour clean
It is possible to program the vapour clean
start time, like any cooking function.
1. After selecting the vapour clean special
function, press the control knob. The
display shows the current time and the
symbol comes on.
2. Turn the control knob to set the time you
wish vapour clean to finish.
3. After a few seconds, the
and
symbols remain lit steadily and the
appliance waits for the set start time to
start the cleaning cycle.
End of the Vapour Clean cycle
1. Open the door and wipe away the less
stubborn dirt with a microfibre cloth.
2. Use an anti-scratch sponge with brass
filaments on tougher encrustations.
3. In case of grease residues use specific
oven cleaning products.
4. Remove any remaining water from the
oven cavity.
For improved hygiene and to prevent food
being affected by unpleasant odours, we
recommend that you dry the oven cavity
using a fan assisted function at 160°C for
approximately 10 minutes.
We recommend wearing rubber
gloves for these operations.
For easier manual cleaning of the
parts difficult to reach, we
recommend removing the door.