background image

224810

17

1.

General

This appliance may only be connected to the electricity supply by an approved electrician. The plastic covering or
veneer of the built-in furniture must have been applied with a heat-resistant adhesive (150°C).

SE 62CX

Cooking zone

14.5 cm

(Twin circuit) cooking zone

12/21 cm

Cooking zone

14.5 cm

(Twin circuit) cooking zone / fryer

18/26.5 cm

2.

For the user

2.1 Important

Attention:

The surfaces of the heating and cooking zones become hot during use. Keep
small children away at all times.

Always ensure that no hard objects are dropped onto the cooking surface. Under certain circumstances the
material is sensitive to mechanical stresses and strains. A heavy knock or blow in a small area can cause the
ceramic hob to break. If careless treatment results in a break, split or crack, the ceramic hob must immediately be
taken out of use and disconnected from the mains power supply. To do this, switch off the safety switch for the
oven connection in the fuse box. Customer Service must be contacted.

Do not use the glass ceramic hob as a storage area! Never prepare food in aluminium foil and plastic containers
on the hot cooking zone.

Do not switch the hob on without using it for cooking. Do not place combustible, volatile or heat deformable objects
directly underneath the hob.

When preparing food with fat or oil stay nearby. Overheated oil can ignite. Never pour water into burning fat or oil.
Risk of burning! Cover the dish in order to extinguish the fire and switch off the cooking zone. Let the dish cool
down on the cooking zone.

In addition, make sure that leads from electrical appliances plugged into nearby sockets cannot come into contact
with the hotplates.

Never clean the glass ceramic hob with a steam cleaner or similar appliance!

2.2 Functions

The arrangement of the individual cooking zones is indicated by pictures on the glass ceramic built-in cooking
surface.

In order to fry, cook or the like, pots should always be placed in the middle of the graphically displayed cooking
zones.

2.3 Twin circuit cooking zone

With a two-circuit cooking zone you can switch on the small heating circuit separately or add the large heating
circuit. Thus you can adapt the size of the heated cooking zone to your pot.

Please note the separate information for built-in ranges, switch boxes or electronic controls in the
separate operating instructions.

2.4 Residual heat display

As long as optical signalling appears after switching off the unit, the corresponding cooking zone is still hot and
can be used economically.

Caution! The signalling devices may fail – e.g. in the case of a lamp. Please note that there is no warning
against high temperatures in such a case.

Содержание SE 62CX









Отзывы: