Smeg SE 2741, Инструкция по эксплуатации

Страница: 6 / 17

36
Optimum protection of the opening
The wood used in the tops of kitchen units may change
shape (e.g. swell) if humidity is present.
Apply a varnish or special adhesive to the sides of the
opening made for built-in installation to assure proper
protection.
Permitted level of protection against fire, and
instructions for use
The appliance has «type X » protection against
overheating (EN 60335-2-6/1990) and can be installed
against walls higher than the work top. For this, it is
important to leave a gap of
50 mm from the rear edge
of the unit and 110 mm from the left-hand side.
The hob is complete with a special adhesive seal « A »
which prevents any infiltration into the unit. The seal
must be carefully fixed around the edge of the opening
for built-in mounting, pressing lightly with the hand to
ensure that it sticks.
Remove the paper protection and place the hob on the
seal.
The seal guarantees a waterproof finish and a perfectly
smooth work top. Fix the hob to the unit using the
brackets already fitted to the appliance.
N.B. - The appliance must be installed by a skilled
engineer in accordance with the regulations in force in
your country.
Always disconnect the appliance from the electricity
supply before any adjustments, maintenance, etc.