Instructions for the Installer
15
4)
Use a pipe-joint compound made for use with
NATURAL and L.P. gas. lf a flexible metal pipe is
used, make sure that the tubing is not kinked.
5)
Always use a pipe-joint compound made for use
with NATURAL GAS and L.P. GAS between
pressure regulator
F
and adaptor
E
and between
pressure regulator
F
and pipe
G
. If a flexible metal
conductor is used, make sure that the tubing is not
kinked.
Use only pipes (
G
) conforming to the standard
regulations in force, inserting gasket
D
(supplied)
between fitting
C
adaptor
E
.
Always place a suitable sealing medium (such as
Teflon tape) between pressure regulator
F
and
adaptor
E
and between pressure regulator
F
and
pipe
G
.
The adaptor
C
must be fitted on the gas connection
A
inserting gasket
B
(supplied)
.
WARNING:
The tightening torque of adaptor
C
with adaptor
E
and adaptor
C
- with gas connection
A
must not be greater than 1416.2 ozf-in (10 Nm).
6)
Before turning on the burners, make sure that the
flame-spreader crowns and the respective caps are
properly fitted in their housings.
Make sure that the flame-spreader holes
A
are
aligned with the ignition plugs and the
thermocouples.
7)
Plug the power supply cord into the grounded outlet.
