Table of Contents
WARNING: For your safety, the information in this manual must be followed to minimize the risk
of fire or explosion, or to prevent property damage, personal injury or death.
Do not store or use gasoline or other flammable vapors and liquids near this or any other
appliance.
WHAT TO DO IF YOU SMELL GAS
•
Do not attempt to switch on any appliances.
•
Do not touch any electrical switches.
•
Do not use any telephones in your building.
•
Immediately call your gas supplier from a neighbor's phone. Follow the gas supplier's instructions.
•
lf you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
INSTRUCTIONS FOR THE INSTALLER:
these are intended for the
qualified engineer
who is able to
install, commission and test the appliance
3
1. IMPORTANT SAFETY INSTRUCTIONS ................................................................................. 4
2. COOKTOP MEASUREMENTS ............................................................................................... 5
3. POSITIONING THE COOKTOP AND LOCATION REQUIREMENTS .................................... 6
3.1 Type A installation measurements (Empty base) ............................................................................................ 7
3.2 Type B installation measurements (Complete base) ...................................................................................... 8
3.3 Gas supply requirements .............................................................................................................................. 10
3.4 Electrical requirements .................................................................................................................................. 11
4. INSTALLING THE COOKTOP ............................................................................................... 13
5. CHECKING OPERATION ...................................................................................................... 16
6. WIRING DIAGRAMS ............................................................................................................. 17
