User instructions
14
Particularly, on the display it will have the following
indications.
Chosen the delay, proceed with the program start, press the button
START/STOP
(7)
for same seconds until the clock symbol start to
flaash.
The machine will perform a dish pre-washing, and when finish, the “delay
program” will enter in function as it was first set.
In case you want to put to zero the “delay program” within the running
program it is necessary:
•
to press the
START/STOP
(7)
button for some seconds until the
clock symbol remain lid up on the display;
•
to press the
DELAY PROGRAM
(6)
more times until the reset of the
delay program (clock symbol shut off);
•
to press the
START/STOP
(7)
button to make start the program.
N.B.:
It is not possible to select the “
delay program
” when the program
have already began.
"3/1" OPTION BUTTON
(available in all programs except the soak program)
Pressing this button
(5)
activates the "
3/1
" option; the relative light
comes on to confirm the selection.
This option is specifically for the use of tablet or powder detergents
which already contain salt and rinse aid. If you decide to use a product of
this kind, press the button to allow the dishwasher to vary the necessary
parameters to ensure the best washing results by making full use of the
quantities of detergent, salt and rinse aid these special products contain.
At the end of the cycle, the appliance automatically presets for the use of
conventional products.
