User instructions
11
3.3 Washing programs
The dishwasher is equipped with a control panel and an
INFORMATION
DISPLAY (10)
from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
LIGHTING
Pressing the
ON/OFF
button
(1)
will start the dishwasher and will lit up
the dishwasher pilot light
(8)
. After approximately
3 second
from this
operation the
DISPLAY (10)
will be turned on with a visualization that will
depend upon the state of the dishwasher.
PROGRAMMING
In this dishwasher model all the programming operations are possible
only with closed door. With open door, on the
DISPLAY (10)
will appear
the symbols
--
and the
PILOT
LIGHT PROGRAMS (9)
remains out.
SELECTION PROGRAM
The program selection is possible
through the relative buttons
(2)
.
By pressing the relative button of desired program (see table) it will lid up
the relative pilot light to confirm that the operation did occurred on the
DISPLAY (10)
will appear a program duration forecasting (“
h.mm
”).
To run programs
6, 7, 8 and 9
select the “main” program (2, 3, 4, or 5)
and then press button
P1
(soak), to activate the
QUICK TIME
function,
which reduces the program’s length, with some increase in water and
electricity consumption.
