Instructions for the installer
43
10.2 Replacement of nozzles on the cooker hob
Unscrew screw
C
and push air regulator
D
as far as
it will go.
Using a 7-mm wrench, remove nozzle
E
and replace
it with the appropriate nozzle, following the
instructions in the tables for the type of gas to be
used. The nozzle tightening torque must be no more
than
3 Nm
.
Adjust the air by sliding regulator
D
until distance “
X
”
from the table in “10.4 Primary air adjustment” is
reached.
Lock regulator
D
by tightening screw
C
.
