Instructions for the user
36
6.2
Cleaning parts
6.2.1 Knobs
The knobs should be cleaned with a soft cloth dampened with warm water, then
dried carefully. For ease of cleaning they can be extracted by pulling upwards.
Do not use aggressive products containing alcohol or products for cleaning steel
and glass when cleaning the knobs, as these products could cause permanent
damage.
6.2.2 Racks
For everyday dirt use a damp microfibre cloth; for incrustations
leave to soak with washing-up liquid and boiling water, then rub
with with a Scotch bright sponge or with a brass brush, rinse and
dry with a microfibre cloth and put it back on the hob.
WARNING: never wash in the dishwasher.
6.2.3 Flame-spreader crowns
The flame-spreader crowns can be removed. Wash them with
warm water and non-abrasive detergent, making sure to remove
any encrustations.
To remove charred resistant dirt use oven cleaner with a Scotch
bright sponge.
For less stubborn dirt and for polish use stainless steel cream
with a microfibre cloth.
Reposition them ensuring that they are
completely dry
and
insert them correctly in their housings (see Chapter “5. Hob use”).
6.2.4 Igniters and thermocouples
For correct operation, the igniters and thermocouples must
always be perfectly clean. Check them frequently and clean them
with a damp cloth if necessary. Remove any dry residues with a
wooden toothpick or a needle.
