Smeg LVS4109B, Инструкция по эксплуатации

Страница: 15 / 33

User instructions
13
INTERRUPTING A PROGRAM
To interrupt a program in progress:
•
press one of the PROGRAM SELECTION buttons (2) ; the light of
the current phase goes out;
•
keep the button pressed until the PHASE/PROGRAMS lights (5)
come on (confirmation beep).
•
start the new program (see “
STARTING THE PROGRAM
”).
CHANGING THE PROGRAM
To change a program while it is running, proceed as follows:
•
Interrupt the program (see "
INTERRUPTING A PROGRAM
");
•
select the new program;
•
start the new program (see “
STARTING THE PROGRAM
”).
ANNULLING A PROGRAM
To annul the program in progress, it must first be interrupted (see
"“
I
NTERRUPTING A PROGRAM
").
Now press buttons P1+P2
simultaneously and the first three
program lights will come on.
In case that the door is opened during the operation, to the next door
closing it is going to be necessary to start the program as shown in
paragraph “
S
TART PROGRAM
”. The program will resume from the point in
which it was interrupted.
In case that the tub temperature is higher than 50°C the program
will start about 30 seconds later.