EN -70-
All repairing operations required for your machine should be carried out by our
authorised service. If your machine requires a repair or if you cannot remove
the fault by the help of the information provided as follows:
•
Unplug your machine.
•
Turn the water faucet off.
(*) See the chapter regarding maintenance and cleaning of your machine.
CHAPTER -9: TROUBLESHOOTING
FAULT
Your machine does
not start.
Your machine does
not intake water.
It is not plugged.
Plug machine in.
Replace the fuses.
Check mains power.
Press on Start/
Pause button.
Switch the programme
button to the desired
position.
Close the machine
door.
Turn your faucet on.
Check water inlet
hose and untwist.
Clean water inlet hose
filters. (*)
Clean the valve
inlet filters. (*)
Close the machine
door.
Fuses out of order.
Electricity cut-off.
Start/Pause button
not pressed.
Programme dial
‘stop’ position.
The machine door is
not completely closed.
Water tap is turned off.
Water inlet hose
may be twisted.
Water inlet hose
clogged.
Valve inlet filter
clogged.
The machine door
not completely
closed.
POSSIBLE CAUSE
TROUBLESHOOTING
Содержание LBW508CIT
Страница 32: ...EN 32 CHAPTER 4 INTRODUCTION OF CONTROL PANEL Detergent drawer Programme knob Display Panel ...
Страница 83: ...EN 83 PAGE LEFT BLANK INTENTIONALLY ...
Страница 84: ...52170955 ...