Smeg LBS845-5, Руководство пользователя

Страница: 8 / 12

8 - EN
Auxiliary functions
Auxiliary function selection keys
Select the required auxiliary functions before
starting the program.
C
Auxiliary function buttons may differ
according to the model of your machine.
Auxiliary function selection
If an auxiliary function that should not be
selected together with a previously selected
function is chosen, the first selected function
will be cancelled and the last auxiliary function
selection will remain active.
Auxiliary function that is not compatible
with the program cannot be selected. (see
“Program Selection Table”)
Pre-wash
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you save
energy, water, detergent and time. Pre-wash
without detergent is recommended for lace
and curtains.
Quick wash
This function can be used for cottons and
synthetics programs. It decreases the washing
times for lightly soiled laundries and also the
number of rinsing steps. Shortens the program
time approximately 45 minutes.
Rinse plus
With this function, you can increase the
number of current rinsing steps. Thus,
sensitive skins’ risk of being affected by the
remainder detergent on the clothes will be
decreased.
Rinse hold
If you do not want to unload your clothes
immediately after the cotton, synthetics,
woolen and delicate fabrics program, you
may release your clothes inside the machine
in the last rinsing water by pressing the rinse
hold button in order to prevent your clothes
become wrinkled. You can spin by pressing
“Start/Pause/Cancel” button after this process.
Anti-creasing
This function reduces drum movement and
limits the spinning speed to prevent creasing.
In addition, washing is carried out at a higher
water level.
C
Use this function for delicate laundries that
crease easily.
C
Whenever you select this auxiliary function,
load your machine with half of the
maximum laundry specified in the program
table.
Spin speed reduction
You may use the speed reduction button
whenever you wish to spin your clothes
below the maximum spin speed. When speed
reduction button is pressed, spin speed will be
at the minimum rpm given on the panel.
No spin
You may use this program if you do not want
to spin your clothes at the end of cottons,
synthetics, woolen or delicate programs.
Time delay
If you wish to wash your clothes at a later
time in machines equipped with a time delay
button, the time delay function allows you
to delay the program start time for 3, 6 or 9
hours.
When the time delaying button is pressed
once, a 3 hours delay is selected. When the
same button is pressed again, 6 hours; and
if pressed once more, a 9 hours delay will
be selected. If the time delaying button is
pressed one more time, time delaying function
will be cancelled. Time delay function starts
countdown after setting the desired time delay
and pressing the “Start/Pause/Cancel” button.
C
More laundry may be loaded during the
time delay period.
Changing and canceling the time delay.
Press the “Start/Pause/Cancel” button to
switch the machine to “Pause” mode. Press
“Start/Pause/Cancel” button to start the
program after making the new time delay
selection.
Starting the Program
Press “Start/Pause/Cancel” button to start
the program. “Start/Pause/Cancel” button
will light up to indicate that the program has
started. The door is locked and the “Ready”
light fades.
Progressing a program
Progress of a running program is shown
through the program follow-up indicator. At the
beginning of every program step, the relevant
indicator lamp will light up and light of the
completed step will turn off.
C
If the machine is not spinning, the program
may be in rinse hold mode or the automatic
spin correction system might have been
activated because of excessive unbalanced
distribution of laundry in the machine.
Changing the program after the
program has started
You can use this feature after your machine
has started to wash different textile groups
in the same batch of clothes under higher
or lower temperatures. You must cancel the
ongoing program in order to change the
washing program.
For example, press and hold the “Start/Pause/
Cancel” button for 3 seconds in order to select
“Cottons 40” program instead of “Cottons 60”