EN
24
-
end of drain hose still correctly positioned.
10 Not all fabric condi-
tioner used or too
much water left in
compartment
Check that detergent drawer siphons are correctly fitted and
not fouled.
11 Appliance does not
spin
Anti-imbalance safety device tripped because laundry not
evenly distributed in drum. If laundry is still wet at end of cy-
cle, rearrange it in the drum by hand and repeat spin pro-
gramme only.
12 Emptying water from
drum
In the event of a power blackout or appliance failure, the wa-
ter can be removed from the drum using the emergency
procedure.
13 Laundry not properly
spun
Large items screwed up and not evenly distributed within
drum. Always wash a mix of large and small items.
14 Traces of detergent on
laundry
Many phosphate-free detergents contain substances with
low water solubility.
Select Rinse programme or brush the laundry.
15 Washing results un-
satisfactory
-
Probably too little detergent or unsuitable detergent
used
-
Difficult stains not dealt with before washing
-
Correct temperature not set
-
Basket overloaded.
ERROR DISPLAY
In case of a malfunction, the appliance will identify the problem by showing an error code on
the display.
Error code
Key to problem
Door not properly closed. Try reclosing.
Aqua stop device tripped. Cut off power supply, turn off water tap and
contact nearest service centre.
Water not taken in for washing. See point 2 in troubleshooting table.
Water not pumped out. See point 4 in troubleshooting table.
For all the other error codes displayed, cut off the electricity supply, turn off the water tap and
contact your nearest Service Centre.
