EN
8
8
RECIRCULATION VERSION AIR OUTLET
• Assemble the two halves of the hood body extension piece
14
(if necessary).
• Push fit the assembled hood body extension piece
14
onto the
air outlet (if necessary).
• Push fit connection
15
onto the hood body extension piece
14
or directly onto the hood body.
• Insert the connection extension pieces laterally
14.1
in connec-
tion
15
.
Should the central reinforcing piece of the frame somehow inter-
fere the chimney air outlet grille, it is possible to unscrew it and
to place it in another screw hole set.
14
15
14.1
Flue assembly - Mounting the hood body
• Position the upper chimney section and fix the upper part to the
frame using the 2 screws
12c
(2,9 x 6,5) provided.
• Similarly, position the lower chimney section and fix the
lower part to the frame using the 2 screws
12c
(2,9 x 6,5) pro-
vided.
Recirculation version
• Make sure that the outlet of the extension pieces
14.1
is hori-
zontally and vertically aligned with the chimney outlets.
• Otherwise, remove the lower chimney and adjust the position
by inverting the extension pieces for air outlet connection
14.1
or by cutting the hood body extension piece
14
(if any)
along
one of the chases destined to the predetermined extension
lengths. Replace then the elements as earlier described.
• Fit the directional grids
8a - 8b
in their housings making sure
that the directional symbols are towards the top. Also make
sure that they are correctly inserted in the connection exten-
sion pieces
14.1
.
Before fixing the hood canopy to the frame:
• Screw the 2 screws
12f
half way into the holes provided in the
sides of the bottom of the frame.
• Remove the grease filters from the hood canopy.
• Remove any activated charcoal filters.
• Lift the hood canopy and engage the screws
12f
in the slots (
A
)
as far as they will go.
• Working from below, fix the hood canopy to the frame (
B
),
using the 4 screws
12q
and 4 washers
22
provided, then tighten
all the screws securely.
8b
8a
12c
12c
A
B
22
12f
12q