manualshive.com logo in svg

Smeg GW-L227, Руководство по обслуживанию

Поделиться
Скачать
Smeg GW-L227 Скачать руководство пользователя страница 15

1-3. Display Second Function

1. Buzzer sound  mute  Mode

The buzzer sound is set to OFF. 
It activates by sounding the recognition sound of “Ding~” after pressing and holding “Express FRZ” button more than 5
seconds. It inactivates when resetting the mode power.

2. Display Power saving Mode 

It places display in standby mode until door is opened.
Press “Freezer” and “Express FRZ” buttons simultaneously to turn all leds become ON and then OFF with the recognition
sound of “Ding~” after 5 seconds. (Be sure not to press only one button to work.) 
Once the mode activates, the display is always OFF. Until door is opened or display button is pressed. When 30 seconds
has elapsed after closing door or pressing button, the display turns OFF. To deactivate this mode is same as the
activation methods. The mode inactivates when resetting the power. 

3. Exhibition Mode

This function is available when exhibiting a refrigerator in the shopping mall. 
Function is inserted with recognition sound “Ding ~” if opening the refrigerator or freezer door and pressing both the
“Express FRZ” button and the “REFRIGERATOR” button at the same time for more than 5 seconds. If function is inserted,
all basic refreezing functions at the R/F room and the Storage room (COMP, F-FAN, C-FAN) turns off and the display
normally operates. However, the dispenser function normally operates. 
The DEMO stops if pressing the button during DISPLAY DEMO, DEMO stops and the display normally operates but
performs DEMO operation again if not pressing the button again for more than 30 seconds (DEMO: Display scenario
when using the display). 
Release method is same as input method.  
The mode is released if power is reset. 

MICOM FUNCTION

- 16 -

Содержание GW-L227









































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды