Smeg Galileo Steam100 страница 45 Скачать руководство пользователя

Страница: 45 / 49

INSTALLATION - 99

91477A665/A

regulations.

For the Australian/New Zealand market:

The circuit breaker incorporated in the fixed
connection must comply with AS/NZS 3000.

Connection with plug and socket

Make sure that the plug and socket are of the
same type.
Avoid using adapters, gang sockets or shunts as
these could cause overheating and a risk of
burns.

Cable replacement

1. Unscrew the rear casing screws and remove

the casing to access the terminal board.

2. Replace the cable.
3. Make sure that the cables (for the oven or

any hob) follow the best route in order to
avoid any contact with the appliance.

Positioning

Position of the power cable

Front panel seal

Glue the supplied seal to the rear part of the
front panel to avoid water or other liquids from

leaking in.

Fastening bushings

1. Remove the bushing covers on the front of

the appliance.

2. Mount the appliance into the recess.
3. Secure the appliance to the cabinet using

screws.

4. Cover the bushings with the previously

removed covers.

Appliance overall dimensions (mm)

Power voltage

Danger of electrocution

• Disconnect the mains power supply.

See General safety instructions.

Содержание Galileo Steam100


















































Результаты поиска

Содержание Galileo Steam100

Отзывы:

Похожие инструкции для Galileo Steam100

Бренды по названию

Популярные бренды

Smeg Galileo Steam100, Руководство пользователя

Результаты поиска

Содержание Galileo Steam100

Отзывы:

Похожие инструкции для Galileo Steam100

Бренды по названию

Популярные бренды