2. ELECTRONIC CONTROLLER DISPLAY LEGEND
Display Description
St
Temperature Setting Mode
di
Temperature Differential Setting Mode
th Cabinet
Temperature Verification Mode
dt
Defrost Frequency Setting Mode
tb
Rapid Freeze Mode
dF
Forced Defrost Mode
Electronic Control Settings
Setting Temperature-
The temperature set point is adjustable from -22˚F to 8˚F for the freezers and 25˚F to
50˚F for refrigerators. The default set point is -5˚F for freezers and 36˚F for refrigerators.
To set or adjust the cabinet temperature;
•
Press the ‘Mode/Set’ button.
•
Press the ‘Up’ or ‘Down’ button until<St> is displayed.
•
Press the ‘Mode/Set’ button to display current temperature set point.
•
Press ‘Up’ or ‘Down’ buttons until desired set point is displayed.
•
Press ‘Mode/Set’ button to set the new value.
•
Press “Up’ or “Down’ button until <th> is displayed.
•
Press ‘Verify’ button to return to display cabinet temperature.
Setting Temperature Differential-
The temperature differential is the amount of swing that the cabinet temperature does
either side of the temperature set point. If the temperature set point is 36˚F and the
temperature differential is 8˚F, the compressor will start when the control shows 40˚F
and stop when the control shows 32˚F. The default temperature differential set point is
8˚F and the range is 4˚F to 16˚F.
To set the temperature differential;
•
Press ‘Mode/Set’ button.
•
Press ‘Up’ or ‘Down’ button until <di> is displayed.
•
Press ‘Mode/Set’ button to see current temperature differential setting.
•
Press ‘Up’ or ‘Down’ button until the desired value is displayed.
•
Press ‘Mode/Set’ button to set the value.
•
Press ‘Up’ or ‘Down’ button until <th> is displayed.
•
Press ‘Verify’ button to return to display cabinet temperature.
Rapid Freeze Mode (freezers only)-
When in rapid freeze mode the compressor will run continuously for 120 minutes and
then return to normal operation and set points.
7/10 Rev. A 146527
4
