Smeg DWIFABNE, Инструкция по эксплуатации

Страница: 15 / 38

User instructions
13
3.2 Washing programs
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the
dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without
obstruction.
•
The dishwasher door is securely closed.
SPREAD HALF LOAD
When there are not many dishes to be watched, the “spread half load”
option, controlled by button is useful; it saves water and electricity and
reduces the program’s duration. Place dishes in both baskets then load
the detergent dispenser than less than the normal amount for a full load.
HYCLEAN OPTION
This function performs an extra antibacterial rinse at the end of the
washing cycle, assuring a further reduction in the number of bacteria
present. In order to ensure that the antibacterial rinse is effective, the
temperature must not fall while it is in progress; if this should occur (e.g.
due to a power blackout or because the door is opened), the indicator
light flashes until the dishwasher is switched off or a new program is
selected, to warn that the antibacterial rinse has not been fully effective.
Press the button to enable/disable the option; the light illuminates to
indicate that the function is active.
ENERSAVE
This option can be selected with the wash programme of choice to
further reduce energy consumption. This ensures perfect drying and
greater control of rinsing temperatures, which can be kept at lower levels
for significant energy saving.
Enersave is activated automatically every time a wash cycle is
selected (except for programs that do not include the final drying phase;
see programs table) and can be disabled before the program is started.
Flexi Tabs, once selected, remains enabled until intentionally disabled.