User instructions
13
TO SAVE ON ENERGY!…AND PROTECT THE ENVIRONMENT
Always use the dishwasher with a full load.
Do not wash the dishes in running water.
Use the washing program that is most appropriate for each type
of load.
Do not carry out any preliminary rinsing.
If available, connect the dishwasher to a hot water supply up to
60°C.
TO REDUCE DETERGENT CONSUMPTION AND PROTECT THE
ENVIRONMENT
The phosphates contained in dishwasher detergents are harmful to the
environment.
To avoid using excessive amounts of detergent save on
electricity as well, observe the following recommendations:
Sort your dishes, washing delicate items separately from those
more resistant to strong detergents and high temperatures.
Do not pour detergent directly onto dishes.
If the door must be opened while a wash cycle is in progress, the
program will be interrupted. The corresponding light will continue to
flash and a beeper will signal that the cycle has not been completed.
You must wait about 1 minute before closing the door to restart the
program.
When the door is closed the program will continue from where
it was interrupted.
This operation should only be carried out if strictly
necessary, as it could cause problems in running the program.
SWITCHING OFF
At the end of the program the beeper
sounds briefly and the lights of programs
no.
4
and
5
(marked "end") flash.
To switch off the dishwasher, open the door and press the
ON/OFF
button
(1)
.
