Smeg CW500, Руководство пользователя

Страница: 23 / 23

22
WATER IN TANK AFTER PUMP-
OUT Drain hose incorrectly positioned
or partially obstructed.
Check that the dishwasher drain hose
and rain are unobstructed and the
drain is not too high up; see
connection diagram.
13 MALFUNCTIONS SHOWN ON THE DISPLAY
The dishwasher is able to identify a number of malfunctions and show them on the display.
If the problem persists after the dishwasher has been switched off and back on, proceed as described below:
Err01
The anti-flooding system has been activated
(for the relevant models only).
Contact the After-Sales Service.
Err04
Tank temperature probe malfunction
Contact the After-Sales Service
Err05
Tank water filling malfunction
Check that the water intake tap is on and the dynamic
pressure in the intake system, inspect the water intake
filter and clean if necessary. If the problem persists,
contact the After-Sales Service.
Err06
Water pump-out malfunction
(dishwasher is left full of water)
Inspect the filters for dirt and check that the drain hose is
not blocked, bent or crushed.
Check that the drain pump is not blocked by dirt; proceed
as described in point “10.2 Periodic checks”.
If the problem persists, contact the After-Sales Service.
Err09
Tank water level too high
Err23
Boiler heating malfunction (does not heat
up)
Err24
Boiler temperature probe malfunction
Contact the After-Sales Service.
Err25
Boiler water filling malfunction
Check that the water intake tap is on and the dynamic
pressure in intake system, inspect water intake filter and
clean if necessary. If the problem persists, contact the
After-Sales Service.
Err26
Boiler emptying malfunction
Check that the rinsing spray arm nozzles are not fouled
If the problem persists, contact the After-Sales Service.
Err27
Boiler emptying malfunction – with tank full
Err28
Boiler heating malfunction (overheating)
Contact the After-Sales Service.