Instructions for the user
66
10.2.2
Burner caps, flame-spreader crowns and burners
The burner caps, flame-spreader crowns and burners can be removed for
easier cleaning. Remove the pan stands and wash them in warm water
with a non-abrasive detergent, taking care to remove all encrustations,
and wait until they are
completely dry.
Replace the flame-spreader
crowns, checking that they are correctly in place with their respective
burner caps, making sure that the holes
A
in the flame-spreader crowns
are aligned with the plugs and thermocouples.
10.2.3
Ignition plugs and thermocouples
For best performance, the ignition plugs and thermocouples
must always be kept thoroughly clean. Check them
frequently and if necessary clean them with a wet cloth.
Remove any dry residues with a wooden toothpick or a
needle.
10.3
Cleaning the oven
To keep the oven in good condition, it must be cleaned regularly, after
allowing it to cool down. Remove all removable parts.
In the auxiliary oven, remove the side runners by lifting them at the front
and extracting them from the hole at the back.
•
DO NOT USE A STEAM JET FOR CLEANING THE APPLIANCE.
•
Clean the oven racks and side runners with hot water and non-
abrasive detergents, rinse and dry.