Smeg CMS4604, Инструкция по эксплуатации

Страница: 26 / 35

26
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
GENERAL ALARM: REFER TO
USER MANUAL The inside of the appliance is very dirty. Clean the inside of the appliance thoroughly, as
described in section “Cleaning”. If the message is
still displayed after cleaning, contact an authorised
Customer Service centre.
Reminder that appliance needs de-scaling
and/or the filter (C4) must be replaced. The de-scaling procedure described in section “De-
scale” needs to be performed as soon as possible
and/or the filter needs replacing or removing as de-
scribed in section “Water softener filter”.
Reminder that tubes inside the milk con-
tainer (D) must be cleaned. Turn the froth adjustment dial (D1) to CLEAN (fig. 21).
Reminder that filter (C4) must be
replaced. Replace the filter or remove it as described in section
“Water softener filter”.
Reminder that machine must be
de-scaled. The de-scaling procedure described in section “De-
scale” needs to be carried out as soon as possible.
Indicates that the auto-start function is
enabled. To disable the function, proceed as described in par.
"Auto-start ".
Energy saving is enabled. To disable energy saving, proceed as described in par.
"Energy saving
".
Indicates that the filter (C4) has been
enabled To remove the filter, proceed as described in section
“Water softener filter”.
CLEANING
PLEASE WAIT The appliance has detected impurities in
its internal circuits. Wait for the appliance to be ready for use again and
reselect the required beverage. Contact an Author-
ised Customer Service Centre if the problem persists.
MACHINE TOO HOT Using the stirrers continuously for long
periods may cause the appliance to
overheat Wait for the appliance to cool down.