Smeg CMS4604, Инструкция по эксплуатации

Страница: 23 / 35

23
EN
DISPLAYED MESSAGE POSSIBLE CAUSE REMEDY
ADD PRE-GROUND COFFEE
PRE-GROUND MAXIMUM
ONE MEASURING CUP A LONG coffee with pre-ground coffee
has been requested Place pre-ground coffee in the funnel (A21) (fig. 14)
and press
to continue and complete
delivery.
FILL BEAN CONTAINER The coffee beans have run out. Fill the beans container (A16 - fig.12).
GROUND TOO FINE. ADJUST
GRIND LEVEL 1 CLICK WHILE
IN OPERATION The grinding is too fine and the coffee is
delivered too slowly or not at all. Repeat coffee delivery and turn the grinding adjust-
ment dial (fig. 11) one click clockwise towards num-
ber 7 while the coffee mill is in operation. If after
making at least 2 coffees delivery is still too slow,
repeat the correction procedure, turning the grind-
ing adjustment dial another click (par. "Adjusting the
coffee mill"). If the problem persists, make sure the
water tank (A12) is fully inserted.
If the water softener filter (C4) is present,
an air bubble may have been released
inside the circuit, obstructing delivery.
Insert the hot water/steam spout (C6) in the appli-
ance and deliver a little water until the flow becomes
regular.
SELECT A MILDER TASTE
OR REDUCE PRE-GROUND
COFFEE QUANTITY Too much coffee has been used.
Select a milder taste by pressing AROMA (B6)
or reduce the quantity of pre-ground coffee (maxi-
mum 1 measure).