background image

Cleaning and maintenance

81

EN

• Pour approximately 40 cc of water into 

the tray. Make sure it does not overflow 
out of the cavity.

• Spray a water and washing up liquid 

solution inside the oven using a spray 
nozzle. Direct the spray against the side 
walls, upwards, downwards and 
towards the deflector.

• Close the door.

Vapor Clean cycle setting

1. Turn the function knob to the symbol 

 and the temperature knob to the 

symbol .

2. Set a cooking time of 18 minutes using 

the programmer clock.

The Vapor Clean cycle starts a few seconds 
after the last press on the programmer clock 
keys.
3. At the end of the Vapor Clean cycle, 

the timer will deactivate the oven 
heating elements, the buzzer will start to 
sound and the numbers on the 
programmer clock dial will flash.

End of the Vapor Clean cycle

4. Open the door and wipe away the less 

stubborn dirt with a microfibre cloth.

5. Use a non-scratch sponge with brass 

filaments on hard to remove deposits.

6. In case of grease residues use specific 

oven cleaning products.

7. Remove the water left inside the oven.

For improved hygiene and to avoid food 
being affected by any unpleasant odours, 
we recommend that the oven is dried using 
a fan assisted function at 160 °C for 
approximately 10 minutes.

We recommend spraying approx. 
20 times at the most.

We recommend wearing rubber 
gloves for these operations.

For easier manual cleaning of 
parts that are difficult to reach, we 
recommend removing the door.

Содержание Classica Concerto Series















































Отзывы: