background image

Description

56

2.2 Cooking hob

Power levels are approximate and can vary according to the pan used or the settings made.

Advantages of induction cooking

• Energy saving thanks to the direct 

transmission of energy to the pan 
(suitable magnetisable cookware is 
required) compared to traditional 
electric cooking.

• Improved safety as the energy is only 

transmitted to the pan placed on the hob.

• High level of energy transmitted from the 

induction cooking zone to the base of 
the pan.

• Rapid heating speed.
• Reduced danger of burns as the cooking 

surface is only heated under the base of 
the pan; foods which overflow do not 
stick.

Zone

Dimensions

(H x L - mm)

min. cookware 

diameter

(mm)

Max. power draw

(W)*

Power draw in

Booster function (W)*

1

190 x 196

120

2100

2300

2

190 x 196

120

1600

1850

3

270 x 270

145

2300

3000

4

180 x 180

110

1300

1400

5

210 x 210

120

2300

3000

The hob is equipped with an 
induction generator for each 
cooking zone. Each generator 
located under the glass ceramic 
cooking surface creates an 
electromagnetic field which 
induces a thermal current in the 
base of the pan. This means the 
heat is no longer transmitted from 
the hob to the pan but created 
directly inside the pan by the 
inductive current.

Содержание Classica Concerto Series















































Отзывы: