Instructions for the user
10
Power Function
The power function allows the user to increase the power of zones 2 and/or 3
for a time of 10 minutes. This function can be used, for example, to bring a
large amount of water to the boil in a hurry, or to turn up the heat under meat.
Turn the knob to the right and set heating level 9, then use the knob to set the "P"
position and release it. "P" appears on the corresponding zone display.
After 10 minutes, the power is reduced automatically, the knob returns to the 9 setting and the "P"
disappears.
However, the power function can be turned off at any time by reducing the heating level.
The rear zones can only be operated at maximum power by reducing the supply of power to the
front zones. When the "power" function is enabled, the front zones will be unable to operate at levels
above 8 for the front left-hand zone and 7 for the front right-hand zone, even if higher power levels
have been set.
This condition is displayed by the number "9", which flashes together with an "8" (for the front left-hand
zone) or a "7" (for the front right-hand zone) as long as the power function is enabled.
Consequently, the power function takes priority over the heating accelerator.
If a pan is removed from the cooking zone while the power function is on, the function is switched off.
ELECTRIC OVEN THERMOSTAT KNOB
Selection of cooking temperature is carried out by turning the knob clockwise to
the required temperature, between
50
° and
260
°C.
If the appliance has an electric oven, the warning light will come on when the
oven is heating up. When it goes out it means that the required temperature has
been reached. Regular flashing means that oven temperature is being
constantly maintained at the programmed level.
ELECTRIC OVEN CONTROL KNOB
Each of the functions listed below can be used (except the oven light and the
small grill) only together with the correct temperature thermostat regulation as
described above.
OVEN LIGHT
GRILL E VENTILATION
UPPER AND LOWER HEATING
ELEMENT
LOWER HEATING E
VENTILATION
GRILL ELEMENT
VENTILATED HEATING E
VENTILATION
THERMOSTAT INDICATOR LIGHT
When this light comes on, the oven is heating up.
When this light goes out, the preset heating temperature has been reached.
When the light flashes, the temperature inside the oven is steady at the set
temperature.
