Instructions for the installer
1
4.3
Arrangement of the burners on the hob
HOB
1.
Auxiliary
2.
Semi-rapid
3.
Rapid
4.
Triple crown
7.
Fish burner
8.
Triple crown
4.4
Oven burner adjustment (only for models with a gas oven)
To adjust the oven burner you need to open the oven door and carry out
the following operations:
•
Remove the oven basin and its rack.
•
Lift up the oven surface and pull it outwards.
4.4.1
Replacing the oven burner nozzle
•
Loosen the oven burner fixing screw
A
.
•
Push the burner
B
towards the right until the nozzle
is accessible.
•
Using a 13 socket wrench replace the nozzle,
inserting a new nozzle suitable for the type of gas to
be used (see paragraph “3.2/3.3 Burner and nozzle
characteristics table”).
4.4.2
Primary air adjustment for the oven burner
•
Loosen the adjustment screw “
A
” of the air regulation sleeve.
•
Turn the adjustment sleeve “
B
” to the position that corresponds to the type
of gas to be used according to the table below.
•
Tighten the adjustment screw and restore the seals.
•
When the operation is completed, reassemble the burner correctly.
NATURAL GAS (N)
G30/G31 (LPG)
5 mm
10 mm
X =
3