Disassembly sequence series 4060
13
WASHING MOTOR DISASSEMBLY
Tools required in this disassembly procedure
TOOL No. 1 Phillips slotted screwdriver
TOOL No. 2 Long nose pliers
1- Remove the top secured by two screws on the rear
side of the machine (tool no. 1).
2.Now pressing with the hand on the front top (1),
push towards the back of the machine lifting it (2),
to completely remove the component.
3.Remove the 6 lateral screws and the 3 screws on
the upper left corner that secure the rear panel of the
machine.
VIEW OF COMPONENTS ATTACHED ON THE
BACK OF THE APPLIANCE.
1
2
