ProtoNode Start-Up Guide
Page 31 of 37
S Bank DIP Switches
A1, A2, and A3 DIP Switches
Appendix B. Vendor Information
Appendix B.1. Additional DIP switch settings
When more configuration settings are needed than possible via the external S Bank DIP Switches, then
the user can access the A Bank DIP Switches internal to the ProtoNode.
NOTE:
The lid on top of the ProtoNode has to be removed in order to select the A Bank of DIP switches.
Pull on the lid while holding the on to the 6 pin Phoenix connector. Please do not hold the wall
mount tabs as these are designed to break off if not required!
To set select these configurations, open the ProtoNode and select the A bank of switches (A1 or
A2 or A3) on the small ProtoCessor module that sits on top of the ProtoCarrier (inside the
ProtoNode).
Figure 25: Additional DIP Switches
