ProtoNode Start-Up Guide
Page 19 of 37
From the Web GUI’s landing page, click on “Setup” to expand the navigation tree and then select
“Network Settings”
to access the IP Settings menu. (
Figure 17
)
Modify the IP Address (N1 IP Address field) of the ProtoNode Ethernet port.
If necessary, change the Netmask (N1 Netmask field).
Type in a new Subnet Mask.
If necessary, change the IP Gateway (Default Gateway field).
Type in a new IP Gateway.
NOTE:
If the ProtoNode is connected to a router, the IP Gateway of the ProtoNode should be set to the
IP Address as the router.
Reset ProtoNode.
Unplug Ethernet cable from PC and connect it to the network hub or router.
Record the IP Address assigned to the ProtoNode for future reference.
Figure 17: Changing IP Address via Web GUI
