Model 3600-I IR3 Flame Detector
Page 57 of 66
➣
To replace the battery:
1. Place the Flame Simulator on a table in a safe area, not exceeding 40°C.
2. Release the locking screw (item 8,
).
3. Unscrew the battery back cover (item 3,
) counter-clockwise.
4. Unscrew the locking disc clockwise (item 4,
).
5. Pull out the battery (item 2,
) from the Flame Simulator.
6. Insert the new battery pack in the simulator housing. Only use the battery pack, P/N
380004.
7. Screw the locking disc (item 4,
).
8. Screw the back cover (item 3,
).
9. Lock the back cover with the locking screw (item 8,
).
General Reference Diagrams:
Figure 48: Flame Simulator
– Side View
