SMC Networks TigerSwitch, Руководство по управлению

Страница: 404 / 518

C
OMMAND
L
INE
I
NTERFACE
4-162
rate-limit
Use this command to define the rate limit level for a specific interface. Use
this command without specifying a rate to restore the default rate limit
level. Use the
no form to restore the default status of disabled.
Syntax
rate-limit { input | output } level [ rate ]
no rate-limit { input | output }
• input – Input rate
• output – Output rate
• rate – Maximum value. (Range: 1-255)
Default Setting
30
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Actual rate limit = Rate limit level * Granularity
Example
rate-limit granularity
Use this command to define the rate limit granularity for the Fast Ethernet
ports, and the Gigabit Ethernet ports. Use the
no form of this command
to restore the default setting.
Syntax
rate-limit { fastethernet | gigabitethernet } granularity
[ granularity ]
no rate-limit { fastethernet | gigabitethernet } granularity
Console(config)#interface ethernet 1/1
Console(config-if)#rate-limit input level 20
Console(config-if)#