SMC Networks TigerSwitch SMC6948L2, Руководство по управлению

Страница: 50 / 166

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-34
Displaying the Current STA for Ports
The parameters shown in the following figure and table are for
port STA Information.
Root Cost The path cost from the root port on this switch to
the root device.
Root Port The number of the port on this switch that is
closest to the root. This switch communicates with
the root device through this port. If there is no
root port, then this switch has been accepted as
the root device of the Spanning Tree network.
Reconfig Count The number of times the Spanning Tree has been
reconfigured.
Topology Up Time The time since the Spanning Tree was last
reconfigured.
Spanning Tree Port Information : Port 1 - 12
==============================
Port Type Status Designated Designated Designated
Cost Bridge Port
-----------------------------------------------------------
1. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.1
2. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.2
3. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.3
4. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.4
5. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.5
6. 10/100TX FORWARDING 4992 32769.2000E8003889 0.6
7. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.7
8. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.8
9. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.9
10. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.10
11. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.11
12. 10/100TX NO LINK 5011 32768.0010B54C1EB6 128.12
<APPLY> <OK> <CANCEL> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrows keys to move. <Enter> to select.
Parameter Description