SMC Networks TigerSwitch SMC6948L2, Руководство по управлению

Страница: 45 / 166

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-29
Configuring Bridge STA
The following figure and table describe Bridge STA configuration.
Spanning Tree Configuration : Bridge STA Configuration
======================================================
Spanning Tree Protocol : ENABLED
Priority : 32768
Hello Time (in seconds) : 2
Max Age (in seconds) : 20
Forward Delay (in seconds): 15
<APPLY> <OK> <CANCEL>
Use <TAB> or arrow keys to move, <Space> to scroll options,
other keys to make changes.
Parameter Default Description
Spanning Tree
Protocol Enabled Enable this parameter to participate in a
STA-compliant network.
Priority 32,768 Device priority is used in selecting the root
device, root port, and designated port. The
device with the highest priority becomes the
STA root device. However, if all devices have
the same priority, the device with the lowest
MAC address will then become the root
device.
Enter a value from 0 - 65535.
Remember that the lower the numeric value,
the higher the priority.
Hello Time 2 Time interval (in seconds) at which the root
device transmits a configuration message.
The minimum value is1.
The maximum value is
the lower of 10 or [(Max. Message Age / 2) -1].