SMC Networks TigerSwitch 100 SMC6924VF, Руководство по управлению

Страница: 67 / 174

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-51
Port Priority Configuration
Inbound frames that do not have any VLAN tags are tagged with
the input port’s default VLAN ID (PVID) and the Default Ingress
User Priority as shown in the following menu, and then sorted into
the appropriate priority queue at the output port. (Note that if the
output port is an untagged member of the associated VLAN, these
frames are stripped of all VLAN tags prior to transmission.)
The default priority for all ingress ports is zero. Therefore, any
inbound frames that do not have priority tags will be placed in the
low priority queue of the output port. You can use the following
menu to adjust default ingress priority for any port as shown below.
802.1P Port Priority Configuration : Unit 1 Port 1 - 12
==================================
Port Default Ingress Number of Egress
User Priority Traffic Class
---------------------------------------
1 0 2
2 0 2
3 0 2
4 0 2
5 0 2
6 0 2
7 0 2
8 0 2
9 0 2
10 0 2
11 0 2
12 0 2
<APPLY> <OK> <CANCEL> <PREV UNIT> <NEXT UNIT> <PREV PAGE> <NEXT PAGE>
Use <TAB> or arrow keys to move, other keys to make changes.
Parameter Description
Port Numeric identifier for switch port.
Default Ingress User
Priority Default ingress priority can be set to any value
from 0~7, where 0~3 specifies the low priority
queue and 4~7 specifies the high priority queue.