SMC Networks TigerSwitch 100 SMC6924VF, Руководство по управлению

Страница: 110 / 174

W
EB
-B
ASED
M
ANAGEMENT
3-22
Spanning Tree
The parameters shown in the following figure and table describe
the current bridge STA Information.
Parameter Description
Spanning Tree State Shows if the switch is enabled to participate in an
STA-compliant network.
Bridge ID A unique identifier for this bridge, consisting of
bridge priority plus MAC address (where the
address is normally taken from the agent).
Max Age The maximum time (in seconds) a device can wait
without receiving a configuration message before
attempting to reconfigure.
Hello Time The time interval (in seconds) at which the root
device transmits a configuration message.
Forward Delay The maximum time (in seconds) the root device
will wait before changing states (i.e., listening to
learning to forwarding).
Designated Root The priority and MAC address of the device in the
spanning tree that this switch has accepted as the
root device.
Root Port The number of the port on this switch that is closest
to the root. This switch communicates with the root
device through this port. If there is no root port,
then this switch has been accepted as the root
device of the spanning tree network.
Root Path Cost The path cost from the root port on this switch to
the root device.
Configuration
Changes The number of times the spanning tree has been
reconfigured.
Last Topology
Change The time since the spanning tree was last
reconfigured.