SMC Networks TigerSwitch 100 SMC6924VF, Руководство по управлению

Страница: 56 / 174

U
SING THE
S
YSTEM
C
ONFIGURATION
P
ROGRAM
2-40
Status Displays current state of this port within the Spanning Tree:
No Link No link has been established on this port.
Disabled Port has been disabled by the user or has
failed diagnostics.
Blocking Port receives STA configuration messages,
but does not forward packets.
Listening Port will leave blocking state due to
topology change, starts transmitting
configuration messages, but does not yet
forward packets.
Learning Port has transmitted configuration messages
for an interval set by the Forward Delay
parameter without receiving contradictory
information. Port address table is cleared,
and the port begins learning addresses.
Forwarding The port forwards packets, and continues
learning addresses.
The rules defining port status are:
• A port on a network segment with no other STA
compliant bridging device is always forwarding.
• If two ports of a switch are connected to the same
segment and there is no other STA device attached to
this segment, the port with the smaller ID forwards
packets and the other is blocked.
• All ports are blocked when the switch is booted, then
some of them change state to listening, to learning,
and then to forwarding.
Designated
Cost The cost for a packet to travel from this port to the root
in the current Spanning Tree configuration. The slower
the media, the higher the cost.
Designated
Bridge (ID) The priority and MAC address of the device through
which this port must communicate to reach the root of the
Spanning Tree.
Designated
Port (ID) The priority and number of the port on the designated
bridging device through which this switch must
communicate with the root of the Spanning Tree.
Parameter Description