SMC Networks TigerStack Скачать руководство пользователя страница 52

Страница: 52 / 80

Testing the Installation

1. Power up or reset the hub and check the LEDs (refer to

“Connecting Power” in Chapter 2).

2. If the Power LED is not lit and there is no activity on the

entire unit:

• Check the connections between the hub, the power

cord, and the wall outlet.

• Check the connections to the punch-down block and

patch panel (if the hub is installed in a rack).

If the Power LED still does not light, contact SMC Tech
Support.

3. If the NMM LED blinks yellow, the power-on diagnostics

have failed. Contact SMC Tech Support.

4. If the Port Status LEDs are not responding:

• Check the connections between each network device

and the hub port, including wiring.

• Check that the devices are powered on and functioning

properly.

5. If the BNC Port Status LED is yellow, be sure the cable

attached to this port is properly terminated.

Note:

If the BNC port is not used, it does not need to be

terminated.

ROUBLESHOOTING

Содержание TigerStack

















































































Результаты поиска

Содержание TigerStack

Отзывы:

Похожие инструкции для TigerStack

Бренды по названию

Популярные бренды

SMC Networks TigerStack, Руководство пользователя

Результаты поиска

Содержание TigerStack

Отзывы:

Похожие инструкции для TigerStack

Бренды по названию

Популярные бренды