SMC Networks TigerStack, Руководство пользователя

Страница: 37 / 80

Connecting to Thin Coax Cabling
Up to 30 devices (hubs, workstations, servers, etc.) may
be connected to a thin coax cable segment with BNC
T-Connectors.
Each cable segment must be terminated at both ends by a 50
ohm BNC terminator. One of the terminators must be grounded.
Note: TigerStack hub BNC ports support extended distance
capability up to 305 m (1,000 ft.) with cable meeting cer-
tain specifications (see Appendix B, “Cables”). However,
if other devices are attached to the same cable segment,
then the maximum length of the cable segment is limited
to the length supported by those products.
To connect a TigerStack BNC port to a thin coax cable
segment:
1. Attach the male end of a BNC T-Connector to the BNC port.
2. Connect one end of a length of thin coax cable to one side
of the BNC T-Connector.
3. Connect either another length of thin coax cable or a
50-ohm BNC terminator to the other side of the BNC
T-Connector.
Thin Coax Connection via BNC Port
26
C
ONNECTING