Rack Mounting
Before rack mounting the hub, pay particular attention to the
following factors:
•
Temperature:
Since the temperature within a rack assem-
bly may be higher than the ambient room temperature,
check that the rack-environment temperature is within the
operating temperature range specified in Appendix A.
•
Mechanical Loading:
Do not place any equipment on top
of a rack-mounted unit.
•
Circuit Overloading:
Be sure that the supply circuit to the
rack assembly is not overloaded.
•
Grounding:
Rack-mounted equipment should be properly
grounded. Particular attention should be given to supply
connections other than direct connections to the mains.
To rack mount the hub:
1. Remove the two screws from the sides of the unit.
Removing the Screws
2. Attach the brackets using the screws provided in the Bracket
Mounting Kit.
10
I
NSTALLING
Содержание TigerStack
Страница 25: ...Stacking the Hubs INSTALLING 14 ...
Страница 48: ...Status Diagnostic LEDs 38 Testing the Installation 41 CHAPTER 5 TROUBLESHOOTING 37 ...
Страница 53: ...42 ...
Страница 75: ...64 ...