Note: Vent hole should
be in the down position
High Gain Parabolic Dish Antenna
Assembly Instructions
Slide Mounting Bracket Holes (2) over the four PEM studs on Hat
Mount (1).
Fasten the four Lock Nuts (3) onto PEM studs on Hat Mount (1).
Mount the back of the Mounting Bracket (4) to an outside fixture.
The Parabolic Dish antenna has a narrow 14
°
beam width, which
requires precise alignment to the opposing antenna.
We suggest you use a compass or other types of alignment aid to
ensure the antennas are pointing precisely at each other.
Component List:
1. PEM studs
2. Mounting Bracket Holes
3. Lock Nuts
4. Mounting Bracket
SMC
Wireless High Gain Antennas / Amplifiers
SMCANT-DIFP11
SMC's Wireless High Gain 11dBi Flat Panel Antenna is a low profile, wide dispersion
directional antenna that is perfect for extending the wireless operating distance for indoor/outdoor
applications.
SMCANT-DI105
SMC’s Wireless High Gain 10.5 dBi Antenna is the ideal wireless networking solution
for home and office environment. This high gain wide dispersion antenna is perfect for extending the
operating distance of a wireless network without the high cost and limitations of wiring.
SMCANT-DI135
SMC’s Wireless High Gain 13.5 dBi Antenna is a universal antenna that can be used
in a wireless LAN environment to provide greater structural penetration. It can also be used as a point-
to-point antenna with an operating distance of up to 7 miles or for general-purpose point-to-multipoint
applications.
SMCANT-DI145
SMC’s Wireless High Gain 14.5 dBi Antenna is the perfect choice for point-to-point
application. This patent pending antenna does not require line-of-sight. It has unsurpassed structural
penetration capability and its narrower beam and higher gain can achieve an operating distance of up to
9 miles.
SMCANT-DI215
SMC’s Wireless High Gain 21.5 dBi Parabolic Dish Antenna is the ideal choice for
long-range point-to-point applications. It has a very narrow beam and the higher gain can achieve an
operating distance of up to 20 miles.
SMCANT-CEILINGBOX
This is an ideal solution providing wireless coverage for any medium to large
indoor installation such as warehouses, multiple-floor office buildings, and hospitals.
SMCAMP-500, SMCAMP-1000
SMC’s high-powered amplifiers can dramatically improves the
performance of the Wireless Access Point/Bridge that it is attached to. With the addition of one of these
amplifiers, the output power of the Wireless Access Point or Wireless Bridge can be increased to
500mW, or 1 Watt of power.
Optional Accessories to install with SMC’s High Gain Antenna / Amplifiers
SMCANT-LP
This Lightning Protector prevents damage and protects your equipment from
lightning-induced surges.
SMCANT-DS
Antenna Desktop Stand is used in conjunction with SMC’s high gain antenna to
secure the antenna in place for indoor use.
SMCANT-MA
Antenna Mounting Arm is used in conjunction with SMC’s high gain antenna to
secure the antenna in place for outdoor use.
SMCANT-CAB25
This 25” LMR 195 Antenna Cable connects SMC’s Wireless Access Point/Bridge
to an SMC High Gain Antenna.
SMCANT-CAB78
This 78” LMR 400 Antenna Cable is used for extending the distance between
SMC’s Access Point/Bridge and an SMC High Gain Antenna.
SMCANT-CAB25F
This 25 ft antenna cable is used for extending the distance between SMC’s
Access Point/Bridge and an SMC High Gain Antenna.
SMCANT-CAB50F
This 50 ft antenna cable is used for extending the distance between SMC’s
Access Point/Bridge and an SMC High Gain Antenna.
SMCANT-CAB50FNN
This 50 ft antenna cable connects the SMCAMP-500 500mW Amplifier or
SMCAMP1000 1 Watt Amplifier to the SMC High Gain Antenna.
SMCANT-CAB75F
This 75 ft antenna cable is used for extending the distance between SMC’s
Access Point/Bridge and an SMC High Gain Antenna.
SMCAMP-INJ
2.4GHz Power Injector will supply power over Ethernet to the SMCAMP-500,
SMCAMP-1000.
Package Contents
After unpacking your SMC High Gain Antenna, Amplifier or Accessory, check the contents of the box
to be sure you have received the following:
•
SMC High Gain Antenna, SMCAMP-500, SMCAMP-1000,
SMCAMP-INJ Power Injector or Antenna Accessories.
•
12V DC Power Supply (included in amplifier packaging only)
•
This Quick Installation Guide
Please register this product and upgrade the product warranty at www.smc.com.
