SMC Networks SMCAMP-1000, Руководство по установке

Страница: 2 / 2

Component List:
1. Type N Connector to Radio
2. Type N Connector to Antenna
3. Power Supply Input
4.
Category 5 cable input
5.
Category 5 cable output
Component List:
1.
Type N Connector to Cable
2.
Type N Connector to
Amplifier/Antenna
3.
Connection to Earth Ground
Desktop Stand
Assembly Instructions
ƒ Place antenna Mounting Screw (2) through Hole (5).
ƒ Screw on Lock Nut (3) and tighten.
ƒ Attach the Cable to the Connector (1) on the back of antenna.
ƒ Attach the other end of the Cable to Wireless Device.
ƒ For optimal results, place the antenna tip (4) in the direction of
desired coverage area.
Component List:
1. Cable Connector
2. Antenna Mounting Screw
3. Lock
Nut
4. Front of Antenna
5. Desktop
stand hole
Mounting Arm
Assembly Instructions
ƒ Place antenna Mounting Screw (2) through the Arm Bracket Hole (3) on
Arm Bracket.
ƒ Screw on Lock Nut (4) and tighten
ƒ Attach the Cable to the Connector (5) on the back of antenna.
ƒ Attach the other end of the Cable to Wireless Device.
ƒ For optimal results, place the antenna tip (1) in the direction of desired
coverage area.
Component List:
1. Front of Antenna
2. Mounting
Screw
3. Mounting Hole
4. Lock Nut
5. Cable Connector
SMCAMP-500, SMCAMP-1000 Amplifier
Installation Instructions
AC Power Option:
•
Attach antenna cable from radio to Amplifier (1) .
•
Attach antenna cable from Amplifier to Antenna (2).
•
Attach supplied power supply to the power input port (3).
Power over Ethernet Option:
•
Attach antenna cable from radio to Amplifier (1) .
•
Attach antenna cable from Amplifier to Antenna (2).
•
Connect Category 5 cable input (4).
•
Connect Category 5 cable output to AP/Bridge (5).
SMCAMP-INJ 2.4GHz Power Injector
Installation Instructions
•
Install AC power adaptor (1)
•
Connect Category 5 cable input (3).
•
Connect Category 5 cable output (2).
Component List:
1. Power Input
2. Category 5 cable output
3.
Category 5 cable input
•
NOTE: Disconnect TNV circuit connector before removing cover.
SMCANT-LP Lightning Protector
Installation Instructions
•
Attach antenna cable to Lightning Protector (1).
• Attach Lightning Protector to Amplifier or Antenna (2)
• Connect grounding wire to Lightning Protector (3)
From Radio To Antenna
2
1
3
From Radio
To Antenna
2
1
5
4