32
The following table describes the parameters of this page.
Field
Description
Current ATM VC Table
This table shows the existed PVCs. It shows the Interface name, channel mode,
VPI/VCI, encapsulation mode, local IP address, remote IP address and other
information. The maximum item of this table is eight.
Click it, the
IP Interface-Modify
page appears. You can modify the PVCs’
parameters.
VPI
The virtual path between two points in an ATM network, ranging from 0 to
255.
VCI
The virtual channel between two points in an ATM network, ranging from 32
to 65535 (1 to 31 are reserved for known protocols)
Encapsulation
You can choose
LLC
and
VC-Mux
.
Channel Mode
You can choose
1483 Bridged
,
1483 MER
,
PPPoE
,
PPPoA
, or
1483 Routed
.
Admin Status
Select Disable, this PVC is unusable.
Enable NAPT
Select it to enable the NAPT function of the router. If you do not select it and
you want to access the Internet normally, you must add a router on the uplink
equipment. Otherwise, the access to the Internet fails. Normally, it is required
to enable NAPT.
Login Name
The correct user name that your ISP has provided to you.
Password
The correct password that your ISP has provided to you.
Connection Type
You can choose
Continuous
,
Connect on Demand
, or
Manual
.
Idle Time(min)
If select connect on demand, you need to enter the idle timeout time. Within
the preset minutes, if the router does not detect the flow of the user
continuously, the router automatically disconnects the PPPoE connection.
WAN IP Settings
Type
You can choose
Fixed IP
or
Use DHCP
.
If select
Fixed IP
, you should enter the local IP address, remote IP address
and subnet mask.
