![background image](http://html1.mh-extra.com/html/smc-networks/pte-50-cet/pte-50-cet_instruction-manual_1300981044.webp)
PTE-50-CET
Sheet 43
•
This feature exists for amplitudes and phase angles, independent or linked.
c) One of the output channels is available to be configured as
Master
of the other two, that can be
configured as
Slave
or
Independent
. Every change made in the
Master
channel will be effective
in the
Slave
channels, at all levels.
5.2.
INTERNAL TIMER
The unit has a
digital
built-in timer with the following technical characteristics:
•
Indication display: 5 digit LED type.
•
Available ranges (autorange):
−
00.001 a 99.999 s
−
100.00 a 999.99 s
−
1000.0 a 9999.9 s
−
10000 a 99999 s
•
Resolution: 0.001 s
•
Accuracy: ± 0.02 % of the value displayed ± 0.001 s
•
Operation
modes:
−
START
by:
a) Internal signal:
−
Any output ON/OFF.
−
Any step or change to 2
nd
value.
b) External signal:
−
Normally open contact in the monitor.
−
Normally close contact in the monitor.
−
STOP by: Any external signal in the monitor, normally open, normally close, dry contact, or
by voltage applied or voltage removed.
•
Duration measurement: Duration of positive and negative signals in the monitor is available.
5.3.
HARMONICS GENERATOR
The unit has the possibility to select, from the front panel controls, up to the 5
th
harmonic of the
fundamental reference frequency on each output channel, in a completely independent way one of
each other, despite it is in current or voltage mode.