SMC Networks PF3W504, Руководство по эксплуатации

Страница: 42 / 74

-41-
No.PF
※※
-OMW0004-A
Specifications
Manifold common specifications
Model PF3WB PF3WC PF3WS PF3WR
Manifold specifications Integrated type Remote type
Arrangement 1 to 10 station

1
Supply: 1 to 5 station
Return: 1 to 5 station
1 to 10 station

1
1 to 10 station

1
U
nit
Rated flow range 0.5 to 4 L/min, 2 to 16 L/min, 5 to 40 L/min
Supply unit
construction
With flow adjustment valve/stop valve -
Return unit
construction
Flow switch
With flow adjustment valve
Stop valve
-
Flow switch
With flow
adjustment valve
Stop valve
Fl
u
id
Applicable fluid Water and ethylene glycol solution with a viscosity of 3mPa

s(3 cP) or less

2
Fluid temp. 0 to 90
o
C (No freezing and condensation)
P
re
s
s
u
re
s
p
e
c
.
Operating pressure
range

3
0 to 1 MPa
Proof pressure

3
1.5 MPa
Pressure loss Refer to graph of pressure loss
En
v
iro
n
m
e
n
t
Enclosure IP65
Operating temp.
range
0 to 50
o
C (No freezing and condensation)
Operating humidity
range
Operation, Storage: 85%R.H. (No condensation)
Standard CE marked (EMC directive, RoHS directive)
Materials in contact with
fluid
PPS, SUS304, FKM
Grease free
P
ip
in
g
p
o
rt
s
iz
e

4
Main piping 1
Attachment 3/8, 1/2, 3/4

1: When the flow range of 40 (rated flow range: 5 to 40 L/min) is selected in the supply/return unit, it is possible to mount 5 stations at a
maximum.

2: Please refer to the chart of measurement range of ethylene glycol aqueous solution on page 50 . Measurement is possible as long as
the fluid does not corrode the wetted parts, and viscosity is 3mPa

s (3 cP) or less. Be aware that water leakage may happen due to
internal seal shrinkage or swelling depending on kinds of fluid.

3: The operating pressure range and proof pressure vary depending on the fluid temperature. Refer to the chart on page 59 .

4: If a reduced piping diameter or the piping layout cause a restriction, it may not satisfy the specifications.

:

The form of the G thread (including the major and minor diameter and pitch of the internal thread) is based on JIS B0202 (ISO228-1).

Products indicated as ISO1179-1 (G thread for hydraulics) or ISO16030 (G thread for pneumatics) are based on JIS B0202
(ISO228-1) for effective depth of thread, seat surface area, surface roughness and squareness.

For ISO1179-1 (G thread for hydraulics), the withstand pressure is specified for each product. SMC do not guarantee the withstand
pressure specified in ISO1179-1, ISO1179-2, ISO1179-3, or ISO1179-4.

For ISO16030 (G thread for pneumatics), the withstand pressure is specified for each product. SMC do not guarantee the withstand
pressure specified in ISO16030.

5: Any products with tiny scratches, smears, or display colour variation or brightness which does not affect the performance are verified
as conforming products.