-28-
No.PF
※※
-OMG0010-G
When Accumulated output mode is selected
The value can be set up to 9999999999 L (999999999.9 ft
3
). The display digits for accumulated flow are
divided into upper, middle, and lower digits. When setting the value, it is divided into upper, middle and lower
digits.
Display
unit
Maximum flow
display value
Display digits
Upper digits
Middle digits
Lower digits
L display
[ U_1]
9999999999 L
9999 m
3
x 10
3
(9999
L)
999 m
3
(999
L)
999 L
ft display
[ U_2]
999999999.9 ft
3
999 ft
3
x 10
6
(999
.
ft
3
)
999 ft
3
x 10
3
(999
.
ft
3
)
999.9 ft
3
: Operate only the product with unit selection function.
<Operation>
Press the
,
and
buttons in function selection mode to display [F_6].
Press the
button.
Input of the Set point
Input of the Set value for the lower digits
[ n_3]
1
and the current Set value
(Lower digits) are displayed in turn.
Press the
and
button to change
the value referring to list of outputs (page
19
).
Input of the Set value for the middle digits
[ n_3]
1
and the current Set value
(Middle digits) are displayed in turn.
Press the
and
button to change
the value referring to list of outputs (page
19
).
Input of the Set value for the upper digits
[ n_3]
1
and the current Set value
(Upper digits) are displayed in turn.
Press the
and
button to change
the value referring to list of outputs (page
19
).
1: When Non-Reverse output has been selected as the switch operation, [P_3] is displayed.
2: This diagram shows an example when L display ([ U_1]) is selected.
Press the
button 3 seconds or longer.
Setting of Set point is completed.
Return to measurement mode.
: Accumulation starts when power is supplied.
