SMC Networks PF2A Series, Руководство пользователя

Страница: 4 / 31

The sub screen (label) shows the item
to be set.
It is possible to
change the settings
while checking the
measured value.
When the S button is pressed and the set value (P_1) is being displayed,
the set value (threshold value) can be set. When the S button is pressed and
the hysteresis (H_1) is being displayed, the hysteresis value can be set.
Existing model
PFG300
New New New
Switches
between displays
Normal output/Lo side Set value (Threshold value) Normal output/Hi side Set value (Threshold value)
1 2 3
Setting completed
Use the or
button to adjust to the
set value.
∗
Either “Input of line name” or “Display OFF” can be added via the function settings.
The sub screen can be switched by pressing the up/down buttons.
Label (Display item)
Sub screen/Left side
Setting completed Setting start
Release the buttons after
“---” is displayed on the
right side sub screen.
Visualization of settings
Allows for the monitoring of remote lines
Easy screen switching
Simple 3-step setting
Pressing the
and
buttons simultaneously
for a minimum of 1 second will make the set value
(threshold value) the same as the current fl ow value.
With a snap shot function for set value reading
Snap shot
function
Accumulated fl ow Set value (Threshold value) Hysteresis value Bottom value Peak value
Mode Examples
Hysteresis mode
Window comparator mode
Normal output Set value (Threshold value) Reversed output Set value (Threshold value) Hysteresis Set hysteresis value
Reversed output/Lo side Set value (Threshold value) Reversed output/Hi side Set value (Threshold value)
Set value (Threshold value)
Sub screen/Right side
PFG300
PFG300
PF3A7 H
PFMB
PFG300 PFG300
PFG300
3-Screen Display
Digital Flow Monitor
PFG300
Series
Always
displayed on
one screen
Centralized flow control
The flow rate of a flow
switch installed in a
distant location can be
confirmed!
p.
1 8
For main line
PFMC
Measured value (Current flow value) Main screen
Push Push
Push Push
3