－
7
－
4) Do not use the product until you have verified that the equipment can operate
properly.
After installation, repair or modification, apply compressed air and power supplies to the
equipment and perform appropriate functional and leakage inspections to make sure the
equipment is mounted properly.
5) When mounting the mini-guide rod cylinder, tighten the screws to the appropriate
tightening torque.
Model
Bolt
Appropriate tightening torque (Nm)
Top mounting
Bottom mounting
MGJ6
M3X0.5
1.2
0.3
MGJ10
M4X0.7
2.7
0.7
Top mounting Bottom mounting
Figure 3-1
6) Keep the flatness of the mounting surface 0.02mm or less.
When mounting the mini-guide rod cylinder to the application or when mounting a workpiece to the
plate, it will cause operation failure if the flatness of the mounting surface is more than 0.02mm.
7) Retract the piston rod when mounting a load.
If a load is mounted to the plate while the piston rod is extended, the guide will be twisted which
may lead to malfunction.
8) Tighten the screw to the appropriate tightening torque when mounting a load.
Model
Bolt
Appropriate tightening torque (Nm)
MGJ6
M2.5X0.45
0.5
MGJ10
M3X0.5
1.0
Figure 3-2
2021-06-28 11:26
DC006789
