－
2
－
2. Product Specifications
2-1. Specifications
Tube I.D. (mm)
6
10
Action
Double acting
Operating fluid
Air
Proof pressure
1.05MPa
Max. operating pressure
0.7MPa
Min. operating pressure
0.15MPa
Ambient and fluid temperature
-10 to 60 deg.C (No freezing)
Cushion
Rubber bumper at both ends
Lubrication
Not required.
Piston speed
50 to 500mm/sec.
Stroke length tolerance
1.0
0
+
Port size
M3X0.5
Guide O.D.
Φ5
Φ6
Warning
1) Understand the features of the product before using it.
MGJ mini-guide rod cylinder is designed to minimize the dimensions of every part including the
overall length in order to miniaturize the entire application equipment and to save space. If this
cylinder is used in the same way as a conventional cylinder, not only will it be unable to maintain the
performance for a long time, but also it may cause breakage depending on the operating conditions.
2) Confirm the specifications.
The product is designed only for use in industrial compressed air systems. Do not operate at
pressures or temperatures, etc., beyond the range of specifications, as this can cause damage or
malfunction. (Refer to the specifications.)
Contact SMC in advance for non-industrial uses, or if using with a fluid other than compressed air.
3. Installation and Handling
3-1. Air supply
The compressed air supplied to the cylinder should be filtered by SMC AF series air filter and
regulated to the specified set pressure by SMC AR series regulator.
Warning
1) Use clean air.
Do not use compressed air which contains chemicals, synthetic oils containing organic solvents,
salts or corrosive gases, etc., as this can cause damage or malfunction.
！
！
2021-06-28 11:26
DC006789
