－
8
－
9) Do not use this cylinder as a stopper.
3-7. Auto switches
Refer to the catalog for the type of applicable auto switches and specifications. Also, for the handling
of the auto switch, refer to the Operation Manual of the auto switch.
3-7-1. Proper mounting position for stroke end detection
Unit: mm
Bore size
A
B
Operating
range
φ6
1.6
0.9
3
φ10
1.3
1.7
4
Figure 3-3
3-7-2. Mounting of auto switch
To mount the auto switch, insert it into the mounting groove of the cylinder from the direction shown
in Figure 3-4, set in the appropriate piston, and tighten using the mounting screws provided. For the
tightening of the mounting screws, use a watchmaker's screwdriver with a handle diameter of about
5 to 6 mm. The tightening torque should be between 0.10 and 0.20Nm.
Figure 3-4
2021-06-28 11:26
DC006789
